The PC contains the following components. CPU

It supports Celeron-M CPU as follows
Intel Celeron -M 350 (1.30GHz)
360 (1.40GHz)
370 (1.50GHz)
380 (1.6GHz)
L1 cache : 64KB (32KB + 32KB)
L2 cache : 1MB
FSB : 400MHz Core voltage : 1.26V

Memory
Two memory slots capable of accepting DDRII-SDRAM 256MB, 512MB or 1GB
memory modules for a maximum of 2GB.
• 200-pin SO-DIMM
• 1.8V operation
• PC4200 support

BIOS ROM (Flash memory)
• 4Mbit (512K×8-bit chip)

Chipset
This gate array has the following elements and functions.
• North Bridge ATI RC410MB for Celeron-M Platform
− Celeron-M processor System Bus support
− DRAM Controller : DDRII 400/533 support
− A-Link Express Interface
− 707-ball 31mmx31mm FC-BGA Package
• South Bridge
− ATI SB400 for Celeron-M Platform
− PCI slot
− IDE controller
− SATA controller
− DMA controller
− USB host interface
− USB 2.0 host controller
− Interrupt controller
− SM Bus interface
− ACPI Power management
− Low Pin count (LPC) interface
− Real time clock
− AC’97 Rev. 2.3 interface
− 564-pin 31mmx31mm BGA Package


PC card controller (PCI1510, Texas Instrument-made)
− PCI Interface (PCI Rev. 2.3)
− PC Card Controller


VGA controller
• Intel VGA
− VRAM 32MB/64MB
− LVDS
− Or ATI
− VRAM 32MB/64MB/128MB
− LVDS

Other main system chips
-Clock Generator (ICS made ICS ) for ATI Platform
- EC/KBC (NS97551 x 1)
- AC97-CODEC (Conexant 20468-51 x1)
- Audio AMP (Maxim 9750x1)

Mini PCI
Wireless LAN card (BTO)
2.4GHz DSSS/OFDM LAN card is equipped. Conformity with IEEE 802.11b/g .
Transfer speed is maximum of 54Mbit/sec. Supports 128bit WEP.
LAN (Realtek RT8100CL x 1)
Controls LAN.
Supports 100Base-TX and 10Base-T.

MODEM (Conexant 20493-21x 1)
Supported by on board Modem + DAA daughter card.
Data and FAX transmission is available.
Supports ITU-TV.90.
The transfer speed of data receiving is 56kbps, of data sending is 33.6kbps and of
FAX is 14.4kbps. Actual speed depends on the quality of the line used.
Connected to telephone line through RJ11 MODEM jack.